Frequently Asked Questions
Tidal Wave Mixer
Is it Easy to Install?
Yes. Most customers are able to drop our water tank mixer into a tank in less than 30 minutes.
How much does it weigh?
The weight of Tidal Wave Mixer is 32lb.
Can you guarantee uniform temperature in a potable water tank?
With high energy mixing, we have shown to have uniform residual in a 9 million gallon reservoir in under 24 hrs. with only 1 mixer.
Can you guarantee uniform temperature in a potable water tank?
With high energy mixing, we have shown to have uniform residual in a 9 million gallon reservoir in under 24 hrs. with only 1 mixer.
Do I need to drain the tank to install the mixer?
No You do not need to drain the tank to install the mixer
Do I need to take the tank offline to install?
No You do not need to take the tank offline to install.
Can I add chlorine to the mixer?
Yes, You can add chlorine to the mixer.
Are your mixers used for freeze protection?
Yes our mixers can be used for freeze protection.
Do mixers help with TTHM mitigation?
Mixers have been shown to help with reducing TTHM mitigation.
How much horsepower does your mixer use?
We have solutions ranging from .5 HP to 3 HP
Can your mixer be maintained by a local technician or does it need to be sent back to the factory for service?
The Tidal Wave mixer is the only mixer on the market that can be serviced by municipal staff. No need to send into the factory for service. Ever.
Can the mixer be connected to SCADA?
Yes, The Tidal Wave Mixer can be connected to SCADA.
Do I need to drain the tank to install the mixer?
No You do not need to drain the tank to install the mixer
Is the mixer NSF/ANSI 61 certified?
Yes, The Tidal Wave Mixer Is NSF/ANSI 61 certified.
Chloramine Boosting System
What is a CBS?
The Chloramine Boosting System is an automated disinfection system for feeding chlorine and ammonia in potable water drinking water tanks and reservoirs.
Can it be placed in a trailer?
Yes, It can it be placed in a trailer
What kind of analyzers can I use?
Our system is vendor agnostic. Typical analyzers used with our system include Prominent, Evoqua, and Hach analyzers.
What kind of pumps are used?
The application is best suited for peristaltic metering pumps.
Where do we inject chemicals?
Preferably over or near to an high energy mixer.
Is your system automatic?
Yes the system is automatic.
Hurricane Blower
How much does it weigh?
The Weight of Hurricane Blower is 225lb.
Is it Easy to Install?
A recent installation took 3 hours to install.
Is it Loud?
No 70 dB from 10 ft. away
What site work is required at the tank?
Power needs to be pulled to the blower control panel. A penetration in the tank needs to made. Install hatch for blower to mount to.
Is the motor belt driven?
No, the motor is not belt driven
What is it made out of?
Hurricane Blower is made out of High Density Polyethelene
What is CFM?
Up to 3740 per unit.
What is the preventative maintenance cycle look like?
There is no preventative maintenance necessary. Filter replacement as needed. Motor is run to fail.
What power is required?
120 volt, 20 amp circuit, single phase
Is it Easy to maintain?
Yes it is easy to maintain.
